Bondtech CHT Nozzle for Volcano - BiMetallic Vanadium - Various Sizes

$44.90

Bondtech's CHT™ BiMetal nozzles for Volcano split the filament into 3 thinner strands allowing to melt the material from within. Increase your flow rate ceiling with this abrasive proof copper and vanadium nozzle.

Nozzle Size
Nozzle Type

Product Options

Frequently Purchased Together

SnoLabs PC + CF Polycarbonate with Carbon Fiber - 1.75 - Black

SnoLabs PC + CF Polycarbonate with Carbon Fiber - 1.75 - Black

$54.99
Quantity
Ready To Ship

Close

Bondtech CHT Nozzle for Volcano - BiMetallic Vanadium - Various Sizes

Increase your flow rate ceiling with this abrasive proof copper and vanadium nozzle!

Fits:

E3D Volcano blocks

Other Volcano type blocks

Artillery Sidewinder X1 and X2

Anycubic Vyper

FLSUN Super Racer

Artillery Genius Pro

Anycubic Kobra and Kobra Max

Lulzbot TAZ MOARstruder

Others compatible with Volcano…

Features/Notes

  • Copper body
  • Hardened Vanadium Steel inserts
  • Nickel Coating
  • 1 unit per pack
  • Available sizes : 0.40, 0.60, 0.80, and 1.0mm
  • Optimized for 1.75mm filament
  • Compatible with 2.85mm filament
  • Requires 6mm wrench

Advantages of the Bondtech CHT™ technology:

Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.


Material Guidelines

These nozzles are guaranteed to stand the test of time with any and all materials, including abrasives, fills, and glow-in-the-dark filaments. 

For carbon or glass fiber materials 0.6mm or larger is recommended

For metal, wood, glitter or other fills any nozzle size can be recommended 

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

600-A-CHT-VOL-175-40
6 Items

Specific References

ean13
7350011415373

You might also like