AMBROSIA Filament of the Gods - TPU 95 - 1KG - 1.75mm

$23.99

Ambrosia Filament's line of TPU95 (Thermoplastic Polyurethane with shore hardness of 95A) is a rubber like material that offers flexibility and incredible layer adhesion - allowing you to use for both industrial and hobby based activities. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Enjoy free or discounted shipping when you buy 3 or more!

Discount applied automatically at checkout. Valid only for orders containing qualifying filaments. May ship in multiple packages. May ship from an alternate carrier.

Lower 48 USA = FREE

Other US States & Territories = $19.99

Canada = $29.99

Trustpilot
Color:
Quantity
Ready To Ship

Close

AMBROSIA Filament of the Gods - TPU 95 - 1KG - 1.75mm

Ambrosia Filament's line of TPU95 (Thermoplastic Polyurethane with shore hardness of 95A) is a rubber like material that offers flexibility and incredible layer adhesion - allowing you to use for both industrial and hobby based activities. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Feed your Printer the Filament of the Gods.

TPU is a wonderful printing material if you're looking for something durable and flexible. We recommend printing TPU generally at consistent speed and temperature on a heated textured bed.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight:

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Ambrosia Filament's Recommended Print Settings for TPU filament:

Attribute
Accepted Value [Our Recommended Value]
Extruder Temperature
190-220 Degrees Celsius [210]
Heated Bed
50-65 Degrees Celsius [60]
Build Surface
Textured PEI or other surface with separation layer
Cooling Fan
0-70% range varies by cooling capabilities
Environmental Temperatures
40-80C [35C]
Soluble Support Materials
HIPS

Technical Specifications for TPU Filament:

Physical Properties
Test Methodology
Values
Density
ISO 1183
12.2-1.25g/cm3
Melt Flow Rate (250C/2.16KG)
ISO 1133
6-10g/10min
Moisture Absorption (23C/24h)
ISO 62
<0.5%
Mechanical Properties
Test Methodology
Values
Tensile Strength
ISO 527
27-28Mpa
Elongation at break
ISO 527
800-1000%
Flexural Modulus
ISO 527
6-7Mpa
Flexural Strength
ISO 178
7-9Mpa
Impact Strength
ISO 180
NB
Thermal Dynamic Properties
Test Methodology
Values
HDT@ 0.455 MPa(66 psi)
ISO 75
95C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

AMB1727
8 Items

Specific References

ean13
1722979563735

You might also like