AMBROSIA Filament of the Gods - ASA - Glitter / Sparkle - 1KG

AMBROSIA Filament of the Gods (Glitter / Sparkle) - ASA - 1KG - 1.75mm

Ambrosia Filament's line of ASA filament is derived from 100% Virgin Grade-A Non-Toxic pellets. This filament has glitter infused into the filament that results in a beautiful sparkle effect. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Feed your Printer the Filament of the Gods.

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG).

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight:

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Ambrosia Filament's Recommended Print Settings for ASA filament:

Attribute

Accepted Value [Our Recommended Value]

Extruder Temperature

230-260 Degrees Celsius [250]

Heated Bed

100-115 Degrees Celsius [110]

Build Surface

PEI, Buildtak, or similar surface [Textured PEI]

Cooling Fan

0-70% range varies by cooling capabilities

Environmental Temperatures

40-120C [45C]

Soluble Support Materials

HIPS

Technical Specifications for ASA Filament:

Physical Properties

Test Methodology

Values

Density

ISO1183

1.08-1.09 g/cm^3

Melt Flow Rate (250C/2.16KG)

ISO 1133

20-25 g/10min

Mechanical Properties

Test Methodology

Values

Tensile Strength

ISO 527

42-45 Mpa

Elongation at break

ISO 527

9-12%

Flexural Modulus

ISO 527

1200-1400 Mpa

Flexural Strength

ISO 178

75-79 Mpa

Impact Strength

ISO 180

19-20 KJ/m^2

Thermal Dynamic Properties

Test Methodology

Values

HDT@ 0.455 MPa(66 psi)

ISO 75

88C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.