AMBROSIA Filament of the Gods - PC-CF - 1KG - 1.75mm

This filament is highly abrasive, and we strongly recommend printing with a hardened ObXidian Nozzle.

Ambrosia Filament's line of Polycarbonate Carbon Fiber blend of filament is designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.

Polycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.

Feed your Printer the Filament of the Gods.

PCCF (polycarbonate + carbon fiber) combines advantages of PC filament with easier printing. This filament includes a blend of approximately 10% PETG to promote a better printing experience without sacrificing the properties of PC or CF. The filament both provides better heat resistance, strength and toughness than ABS or other common filaments with printability only being marginally tougher.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Chopped Carbon Fiber Strands
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight:

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Ambrosia Filament's Recommended Print Settings for PC-CF filament:

Technical Specifications for PC-CF Filament:

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. CARBON FIBER FILAMENTS HAVE INCREASED RISK OF USE AND SHOULD NOT BE SANDED OR USED WITHOUT PROPER EQUIPMENT. HANDLE WITH CARE, USING APPROPRIATE TOOLS AND PROTECTIVE WEAR (E.G. GLOVES) WHEN HANDLING. ONLY USE IN A WELL VENTILATED AREA, WITH PROPER RESPIRATION EQUIPMENT. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.