![](https://kb-3d.com/store/2073-large_default/snolabs-pc-polycarbonate-filament-175-1kg-multiple-styles.jpg)
![](https://kb-3d.com/store/2073-large_default/snolabs-pc-polycarbonate-filament-175-1kg-multiple-styles.jpg)
SnoLabs PC+ Polycarbonate filament is a high strength and high impact resistance thermoplastic designed for printability on a wide range of 3D printers. It has a high heat deflection temperature of 125-145 degrees Celsius.
Enjoy free or discounted shipping when you buy 3 or more!
Discount applied automatically at checkout. Valid only for orders containing qualifying filaments. May ship in multiple packages. May ship from an alternate carrier.
Lower 48 USA = FREE
Other US States & Territories = $19.99
Canada = $29.99
Technical Data Sheet available in the attachment tab.
Polycarbonate is an extremely strong, impact resistant thermoplastic that is widely used in industrial applications. This material does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print. We usually don't leave PC+ out for more than 3 days.
Our PC+ differs from pure PC as it contains additives to make it easier to print reliably.
High strength and heat resistance.
Malleable while cold and can be bent without cracking.
Exceptionally durable.
Hygroscopic!!
Print temp (°C) 245 ~ 275 (Less conductive nozzles may benefit from +10C)
Bed temp (°C) 70~ 100
Speed (mm/s) 50
Diameter Tolerance ±0.03mm
Net Weight (kg) 1
Gross Weight (kg) 1.5
Full Length (1.75 mm) 396 M
Specific References
You might also like