Bob Smith Industries QUIK-CURE 5 Minute Epoxy - 4.5oz

$13.99

Bob Smith Industries (BSI) QUIK-CURE 5 minute epoxy offers strong and durable adhesion to nearly all substrates. Cures to a slightly flexible consistency and sold in a 4.5oz (mixed) size. 

Product Options

Frequently Purchased Together

Bob Smith Industries Insta-Cure + CA Super Glue - 1oz

Bob Smith Industries Insta-Cure + CA Super Glue - 1oz

$6.99
Bob Smith Industries Insta-Clean Sticker/Adhesive Remover - 2 FL. oz

Bob Smith Industries Insta-Clean Sticker/Adhesive Remover - 2 FL. oz

$4.99
Loctite Threadlocker 242 - Medium Blue - 6mL

Loctite Threadlocker 242 - Medium Blue - 6mL

$8.69
Loctite Threadlocker 222ms - Low Strength - Purple - Mil Spec - 6mL

Loctite Threadlocker 222ms - Low Strength - Purple - Mil Spec - 6mL

$7.19
Quantity
Ready To Ship

Close

Bob Smith Industries QUIK-CURE 5 Minute Epoxy - 4.5oz

Bob Smith Industries (BSI) QUIK-CURE 5 minute epoxy offers strong and durable adhesion to nearly all substrates. Cures to a slightly flexible consistency and sold in a 4.5oz (mixed) size. 

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.

Works best on:

Hard Wood

Glass

Metals

Works well on:

Balsa Wood

Softer Wood

Fiberglass

Ceramics

Hard Plastics

White Foam

Directions:

QUIK-CURE™ 5 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

QUIK-CURE™ is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40˚F. Temperatures above 90˚F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.

QUIK-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. QUIK-CURE’S™ lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUIK-CURE™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.

BSI-201
25 Items

You might also like