![](https://kb-3d.com/store/2168-large_default/bondtech-lgx-ace-mosquito-hotend.jpg)
![](https://kb-3d.com/store/2168-large_default/bondtech-lgx-ace-mosquito-hotend.jpg)
This LGX ACE Mosquito is a special short filament path hotend, co-developed by Bondtech and Slice Engineering, to be used with the LGX eXtruder.
This LGX ACE Mosquito is a special short filament path hotend, co-developed by Bondtech and Slice Engineering, to be used with the LGX eXtruder.
It features Slice’s Mosquito bi-metallic heat-break technology and Copper hot block for improved thermal performance.
Pairing it with the LGX forms a print head that will excel at printing ALL most common materials and especially the soft and flexible.
During the long months of deep testing that preceded the launch of the LGX CHT nozzles, Bondtech discovered that shortening the post-drive filament path generates increased volumetric flow rate capacity. Similar to the LGX Shortcut Mosquito , the LGX ACE Mosquito delivers that same increase when comparing to the full Mosquito hotend.
The LGX ACE Mosquito Hotend features a monolithic air-cooled cold block and heat sink, designed and manufactured by Bondtech, that engages with the LGX extruder using its interface plug and rests at the front of the extruder. The heat sink includes the hole pattern for attaching 40×40 fans.
Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, due to the monolithic design of the cold block and heat sink that increases heat transmission and dissipation.
1x LGX Black Anodized Aluminum Monolithic Cold Block and Heat Sink
1x Mosquito LGX Heat Break
1x Mosquito Hot Block
1x Bondtech M6x1x7.5 Coated Brass Nozzle 0.4mm
1x Silver Based Thermal Paste Sachet 0.5g
You might also like