Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Copperhead™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.

Improve the heat dissipation capacity

Use retractions as short as the nozzle diameter.

Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5

This DDX set is the right configuration to upgrade the stock hotend to PHase 3, with an original Copperhead™ hotend on any Creality using the Bondtech DDX Direct Drive eXtruder.

High Quality Components

Product is supplied with a Aluminum Screw Mount Heat Sink, a W2S (Tungsten Disulfide) plated Stainless Steel and Copper Standard Heat break, a Nickel plated Copper Hot Block, a PA6 Laser Sintered DDX Adapter for Copperhead™, and a Brass Thermistor Adapter.

How To Change Nozzles

When changing nozzles with this hotend there is no need to immobilise the hot block before twisting the nozzle. You can screw in, or unscrew, the nozzles without holding the hot block steady, when using the recommended Torque Wrench.