Standard ASA filament from Ambrosia's Filament of the Gods product line
  • Standard ASA filament from Ambrosia's Filament of the Gods product line

AMBROSIA Filament of the Gods - ASA - 1KG - 1.75mm (Multiple Colors)

$22.99

Ambrosia Filament's line of ASA filament is derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Enjoy free or discounted shipping when you buy 3 or more!

Discount applied automatically at checkout. Valid only for orders containing qualifying filaments. May ship in multiple packages. May ship from an alternate carrier.

Lower 48 USA = FREE

Other US States & Territories = $19.99

Canada = $29.99

Color:
Quantity
Ready To Ship

Close

AMBROSIA Filament of the Gods - ASA - 1KG - 1.75mm

Ambrosia Filament's line of ASA filament is derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Want ASA with a bit of sparkle? We have it here!

Feed your Printer the Filament of the Gods.

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG).

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight:

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Ambrosia Filament's Recommended Print Settings for ASA filament:

Attribute
Accepted Value [Our Recommended Value]
Extruder Temperature
230-260 Degrees Celsius [250]
Heated Bed
100-115 Degrees Celsius [110]
Build Surface
PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan
0-70% range varies by cooling capabilities
Environmental Temperatures
40-120C [45C]
Soluble Support Materials
HIPS

Technical Specifications for ASA Filament:

Physical Properties
Test Methodology
Values
Density
ISO1183
1.08-1.09 g/cm^3
Melt Flow Rate (250C/2.16KG)
ISO 1133
20-25 g/10min
Mechanical Properties
Test Methodology
Values
Tensile Strength
ISO 527
42-45 Mpa
Elongation at break
ISO 527
9-12%
Flexural Modulus
ISO 527
1200-1400 Mpa
Flexural Strength
ISO 178
75-79 Mpa
Impact Strength
ISO 180
19-20 KJ/m^2
Thermal Dynamic Properties
Test Methodology
Values
HDT@ 0.455 MPa(66 psi)
ISO 75
88C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

AMB1494
10 Items

Specific References

ean13
1722964560015

You might also like