Matched Height Kinematic Mounting Kit

This kit from Mandala Rose Works includes the parts and hardware necessary to mount your bed in a kinematically coupled system for the purposes of handling the thermal expansion of your bed as it heats. For use with 6mm - 10mm bed thicknesses.

Designed for use with Voron V2 and Trident 3D printers, but easily integrated with many others using 20 series aluminum extrusions.

Based on Kelvin style kinematics, and includes 150C N48SH magnets to maintain the connection of the bed to the yokes.

Each of the bases have slightly different heights to account for where the threaded balls sit on the magnets. 

The pin mount has movable location blocks depending on the orientation you need for your particular printer. Please note, you will likely need a longer Z axis end stop pin on a v2.4 to use the kinematics. Please read this file for the observations written by a beta tester.

Instructions are included in the box, but if you misplaced them, click this link to get a copy.

Please Note: The kinematic kit was tested and is designed for use with stock Voron machines.

Includes:

- 1 magnet base for the flat magnet

- 1 magnet base for the chamfered magnet

- 1 pin mount base

- 2 pins

- 2 magnet covers

- 3 internally threaded balls

- 3 m3 bolts

- 8 m3x6 button heads

- 2 m3x8 buttons heads

- 1 chamfered disc magnet - 150C

- 2 flat disc magnets - 150c

- 3 m4 T-Nuts

- 3 m4x8 Cap Head Bolts

- 1 hammerhead m5 T-Nut

- 2 m2x4 button heads

Not Included:

130mm (approx) extrusion for mounting on a Voron 2.4, you may however download and 3d print one in a pinch.

- or -

Check out our Kinematic Center Brace if you desire a truly unique piece for your printer.