E3D Rapid Change Revo Nozzle - Belt - Various Sizes

$29.99

Designed specifically with belt printing in mind these belt nozzles have a longer reach to enable printing at 45° with Revo HotEnds. Start swapping nozzles in under than 60 seconds without tools or hot tightening. Just use your fingers!

Nozzle Size

Product Options

Frequently Purchased Together

E3D Rapid Change Revo Nozzle - ObXidian - Various Sizes

E3D Rapid Change Revo Nozzle - ObXidian - Various Sizes

$51.99
E3D Rapid Change Revo Nozzle - High Flow - Various Sizes

E3D Rapid Change Revo Nozzle - High Flow - Various Sizes

$44.99
E3D Rapid Change Revo Nozzle - Brass - Various Sizes

E3D Rapid Change Revo Nozzle - Brass - Various Sizes

$22.99
LDO / NAK 3D Creality CR-30 Orbiter Hardware Kit

LDO / NAK 3D Creality CR-30 Orbiter Hardware Kit

$18.99
LDO Orbiter V2.0 Extruder

LDO Orbiter V2.0 Extruder

$59.99
LDO Orbiter V2 Filament Sensor Kit - V2.2

LDO Orbiter V2 Filament Sensor Kit - V2.2

$18.95
Quantity
Ready To Ship

Close

E3D Rapid Change Revo Nozzle - Belt - Various Sizes

High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimized internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximize your flow rate with standard printing materials. 

Higher Flow

Revo High Flow increases your setup's volumetric flow rate, enabling you to print faster!

How does it work?

Unlike our previous E3D High Flow Hotends (Volcano and SuperVolcano), Revo High Flow maintains the exact same form factor as standard Revo HotEnds; this means there is no need to adjust your pre-existing mount and fan duct setups! Revo High Flow uses a unique custom internal geometry to increase the surface area for improved thermal transfer to the filament. 

Experiment freely

Revo Belt Nozzles come in three different sizes – 0.4mm, 0.6mm and 0.8mm. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution.

Frustration-free

Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing!

Rapid identification

Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!

Please note:

- Revo™ Nozzles are not compatible with V6-style heaterblocks

- You may need to adjust your Z offset when changing nozzles.

RC-NOZZLE-BELT-AS-0400-SPK
3 Items

Specific References

ean13
5060567869477

You might also like