LDO Voron 2.4 R2 Printer Build Kit - REV D

Now shipping free to the lower 48 states of the USA!

See LDO's Full BOM for this kit below

350mm BOM

300mm BOM

Need Printed Parts? Find them here!

Rev D Change Log:

Spend less - Get More!

LDO Leviathan Controller Board

USB Tool Head communication via LDO Nitehawk-SB

Changed to Genuine Bondtech IDGA extruder gear for improved concentricity

Pre-applied magnetic base for PEI flex sheets

Now includes an assortment of printed parts allowing users to work from the standard BOM when printing or purchasing printed parts. 

Features & Extras

• Stainless Steel Linear Rails -12H size rails for X axis included. No more worrying about rusty rails. You'll still want to grease these rails, but you can do it at the end of your build.
• Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease!
• Input Shaper Tool- We thew in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
• Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guide.
• LED Lighting - Bring lighting to your Voron with included LED strips and all necessary wiring!
• Nevermore Filter - We include parts for a optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).
• Klicky Mod -  Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.
• Small Tools - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screw driver that is useful in a surprising numerous situations.
• 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

Tips

• Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_2_questions channel.
• Get a serial number once you finish building your Voron.

Guides

• Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
• Wiring Guide - We created this supplementary wiring guide to go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.

Not Included:

• Raspberry Pi - Add one if you need above!
• Printed Parts - This kit does not include printed parts - aside from the parts that LDO has changed from the standard Voron BOM. Find the files you need to print your own on the LDO docs page above.