

Designed and produced by 3DO this Nozzle Camera Kit is a purpose built solution for 3D Printers. Available in 4K with multiple cable lengths.
Designed and produced by 3DO this Nozzle Camera Kit is a purpose built solution for 3D Printers. Available in 4K and multiple cable lengths.
See the project's Github here for print files and more information
1x Nozzle Camera (4K)
4x 2*10mm SHCS screws (for PCB mounting)
2x 5050 SK6812 WWCW 6000K LED
1x High-quality high-temperature USB cable (FEP + Silicone) - CHOOSE YOUR LENGTH FROM THE DROP DOWN MENU!
4K via Sony IMX258
|
4K (Sony IMX258) |
|
Sensor Size |
1/3.06 |
|
Mega-Pixel |
13MP |
|
Frame Rate |
30FPS@4K 60FPS@1080P |
|
Lens type* |
Fixed Focus |
|
FoV |
80Deg |
|
Operating temperature** |
-20°C TO 60°C |
|
Storage temperature |
-40°C TO 80°C |
*Focus distance from the back side of the camera to the object is set to 34.5mm
(it’s possible to change the focus distance by rotating the lens. Note the lens is glued in place, so new glue needs to be applied after adjusting)
**Though this is the camera rating we tested it in a 70C heat chamber for 24hrs without any issues. Not recommended for machines with high chamber temperatures.
FPC (Ribbon between sensor and PCB) is rated at 225C.
Olof Ogland (Known from Bondtech)
Kenneth Munkholt (VZ Community)
Dennis Jespersen (From RatRig Comunnity)
Meteyou (Mainsail founder)
KwadFan (Crowsnest founder)
Rogerlz(Crowsnest Tester)
Mitsuma (From RatRig Comunnity)
Joao Barros (From RatRig Comunnity)
You might also like