Meet Blackbox - An extremely capable open source tool changing platform. The community edition is configurable with up to 5 water cooled tools and your choice of hot end options.
This pack contains
This hardware kit includes the universal pieces required to add (1) additional FDM tool to the Blackbox toolchanging 3D Printer.
FDM Tool Hardware Kit for Blackbox
This genuine heater cartridge from E3D is designed for 24V systems and offers 40W of heating capacity. It is white in color and terminated with pre crimped ferrules for easy and safe installation.
E3D 24V 40W Heater Cartridge
At 50 watts of heating capacity, the Slice Engineering Mosquito heater cartridge is able to maintain hot block temperatures up to it's rating of 450 degrees celcius. For use as a spare part or combining with our other products for a truly unlimited hot end.
Slice Engineering Mosquito 50W Heater - 24V
This industrial heater from Slice Engineering is rated for high operating temperatures and designed for continuous operation in an enclosed heated chamber. State of the art, robust construction with internally connected terminal pins inside the cartridge provide for the ultimate in safety and reliability.
Slice Engineering Industrial Heater - 50W - 24V
This genuine heater cartridge from E3D is designed for 24V systems and offers 40W of heating capacity. It is green in color and features a rounder cartridge for more consistent contact and heat transfer with the heater block.
E3D High Precision / Premium Heater Cartridge - 24V - 40W
E3D cartridge type thermistors use a Semitec 104NT sensor potted in a cylindrical stainless steel cartridge with a highly conductive ceramic based adhesive.
E3D Thermistor Cartridge - Temperature Sensor
Designed for the Slice Engineering Mosquito and Mosquito Magnum, this accurate thermistor is also easy to install on virtually any printer. Capable of precision temperature reporting from room temperature to 300 degrees celcius. Supplied with a generous 2 meters of bare leads.
Slice Engineering 300C Thermistor
Pt1000 Resistance Temperature Detector (RTD) uses a platinum resistor for the ultimate in temperature sensing performance. Works with Duet 3 and other high amperage boards out of the box. Perfect for any Pt1000-compatible 3D printers.
Slice Engineering RTD PT1000 Thermistor
This aluminum V6 heater block is a core part of the E3D ecosystem as the standard hot block. It includes an M3 grub screw to secure a cartridge-style thermistor, PT100 or thermocouple. Also includes an M3 dome head screw to clamp the heater cartridge and a pair of the needed hex keys.
E3D V6 Heater Block - Aluminum
This nickel plated copper V6 heater block is an upgrade offered from E3D over the standard aluminum block. It can support higher flow due to increased conductivity and printing temperatures up to 500C. It includes an M3 grub screw to secure a cartridge-style thermistor, PT100 or thermocouple. Also includes an M3 dome head screw to clamp the heater cartridge and a pair of the needed hex keys.
E3D V6 Heater Block - Plated Copper
Made of a Nickel plated Copper alloy, this affordable hot block from Slice Engineering is capable of temperatures up to 450C allowing reliable printing of any FDM material. Designed to be well suited for printing flexibles! Sold Each.
Slice Engineering Copperhead Hot Block
3mm Dark Gray (2074) Transparent Enclosure Kit for Blackbox 3D Printer
Cast Acrylic is easy to drill, cut, and machine for additional holes, slots, mounting, ETC.
Blackbox Enclosure Kit - Transparent Grey Acrylic - 3mm
Includes: (1) X Carriage, (1) Idle Tool Cooler, (2) Belt Clamps, and (1) T-Lock - 1 kit required per Blackbox build
Blackbox Aluminum Printer Motion Kit
This Kit comes with all linear shafts & rods needed for a complete 5 tool Blackbox build. Made from DIN100CR6 bearing steel, these shafts / rods / axles have a tight diameter tolerance with a Rockwell Scale hardness of HRC60.
Linear Shaft Kit for Blackbox
Genuine E3D Stainless Steel heat break for use with Kraken and Chimera.
E3D Kraken / Chimera Heat Break - 1.75
E3D's stainless steel heat break for use with the standard V6 hot end. Uses an M6x1.0 thread.
E3D Stainless Steel Heat Break - V6 - 1.75mm
E3D's Titanium heat breaks offer superior insulation of your hot end
E3D Titanium Heat Break - V6 - 1.75mm
This bi metallic heat break adapts a Slice Engineering Copperhead hot end to any standard RepRap heat sink. Comptaible with E3D, Prusa, and many others.
Slice Engineering Copperhead RepRap 1.75 Heat Break
Slice Engineering's Vanadium steel nozzles offer a lifetime warranty against abrasion to handle the most aggressive materials on the market. Carbon, glass, metal, and wood filled filaments are no match for this hardened and tempered nozzle with a wear resistant, plastic repellent coating. Available in 5 different orifice sizes.
Slice Engineering Vanadium Nozzle - Various Sizes
Slice Engineering's BridgeMaster nozzles offer a copper alloy core and a carbide based surface coating to bring you a nozzle with excellent bridging capabilities as well as wear resistance to abrasive filaments. Compatible with all standard threaded heater blocks. Available in 11 different orifice sizes.
Slice Engineering Bridgemaster Nozzle - Various Sizes
This Genuine E3D V6 nozzle in brass is designed for use with 1.75mm diameter filament and has an orifice size of 0.4mm. Brass nozzles offer smooth and consistent flow and are best suited for non-abrasive filaments.
E3D V6 Nozzle - Brass - 0.4mm - 1.75
Bondtech's CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be realized. Made of nickel coated brass.
Bondtech CHT Nozzle - Plated Brass - 1.75 - Various Sizes
This Genuine E3D V6 nozzle in nickel plated copper is designed for use with 1.75mm diameter filament and has an orifice size of 0.4mm. Copper nozzles offer superior thermal conductivity and can safely print at temperatures up to 500C for high temperature 3D printing.
E3D V6 Nozzle - Plated Copper - 0.4mm - 1.75
This Genuine E3D V6 "Nozzle X" is produced in a nickel plated specialized tool steel and is designed for use with 1.75mm diameter filament. It can withstand extremely high printing temperatures and/or abrasive filament without degradation. It also features a nano-coating that eliminates material build-up. This nozzle has an orifice size of 0.4mm
E3D V6 Nozzle - Nozzle X - 0.4mm - 1.75