AMBROSIA Filament of the Gods - ABS Matte - 1KG - 1.75mm

In contrast to Ambrosia's Uber ABS, this line of ABS matte filament has no additional polymer additives that impact printability or material properties. The resin was hand picked for its proven track record of being easily printable and creating an excellent surface finish. That, paired with high quality standards has reinvented the Ambrosia ABS.

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.

ABS Filament (Acrylonitrile Butadiene Styrene) is one of the most popular 3D printing filaments around, used in a variety of applications including industrial/engineering. It is a filament that handles bridging really well, and offers a great combination of strength and durability making it the first choice for more practical 3D prints (over PETG or PLA) that require tougher longer lasting items that can withstand greater temperatures. ABS can be smoothed using acetone, making for strikingly smooth parts.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 130g

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend 3D printing this Cardboard Spool Ring and Clamp.

Ambrosia Filament's Recommended Print Settings for ABS Matte filament:

Technical Specifications for Ambrosia ABS Matte Filament:

Note: The HDT value is based on 1.8MPa (261 psi). Standard tests for other Ambrosia filaments were measured at 0.455 (66 psi), roughly 4 times the stress level. Because of this, and without further testing we cannot provide a figure, but expect the HDT to be significantly higher than 88C (one plastics resource suggests 98C).

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.