Shipping is free with 150$ purchases! Continental US only.
Menu
LDO Nitehawk-SB CAN Tool Head for Voron
$39.99
Nitehawk is a CAN tool head PCB with a RP2040 MCU, TMC2209, Accelerometer all integrated into one board. The form factor is based on HartK’s two piece stealthburner tool head PCB.
LDO Nitehawk-SB CAN Tool Head for Voron
Learn more at LDO Docs here
See the GitHub here
Nitehawk is a CAN tool head PCB with a RP2040 MCU, TMC2209, Accelerometer all integrated into one board. The form factor is based on HartK’s two piece stealthburner tool head PCB.
Features
Greatly simplified wiring, a single wire runs through the drag chain or in an umbilical setup. No additional breakout cables needed.
Based on Klipper USB, no additional hardware or software setup compared to CAN.
Tachometer enabled fan ports (PCF and HEF), allowing for fan speed detection.
Integrated accelerometer for convenient input-shaping.
Includes:
|
Items |
QTY |
|
Toolhead PCB |
1 |
|
USB Adapter PCB |
1 |
|
Stealthburner Fan Adapter |
1 |
|
USB Umbilical Cable |
1 |
|
USB-A to USB-C Data Cable, 0.3m |
1 |
|
24V Power Cable |
1 |
|
Machine Screw, Captive, M3x6 |
2 |
|
Machine Screw, BHCS, M3x8 |
3 |
|
Machine Screw, SHCS, M3x10 |
4 |
|
MX3.0 Male Connector, 3x2pin |
1 |
|
MX3.0 Female Crimp Terminal |
8 |
|
XH2.54 Female Connector, 2pin |
1 |
|
XH2.54 Female Connector, 3pin |
1 |
|
XH2.54 Female Connector, 4pin |
2 |
|
XH2.54 Female Crimp Terminal |
20 |
|
XH2.54 Female Connector, 2pin |
1 |
|
XH2.54 Female Connector, 3pin |
3 |
|
XH2.54 Female Crimp Terminal |
12 |
|
Ferrule, 1008 |
4 |
|
Ferrule, 0508 |
4 |
You might also like
Nitehawk is a CAN tool head PCB with a RP2040 MCU, TMC2209, Accelerometer all integrated into one board. The form factor is based on HartK’s two piece stealthburner tool head PCB.