- New
Shipping is free with 150$ purchases! Contiguous US only. Same day shipping cut-off -- 2PM EST
Menu
Menu
Micro Swiss FlowTech Hyper-CHT Nozzle
$32.50
The Micro Swiss Hyper-CHT nozzle uses a six-chamber internal geometry that more than doubles heated surface area, increasing the maximum flow rate by up to 95% over a stock nozzle. The hardened 68 HRC tip handles abrasive filaments and has a non-stick WS2 coating.
Compatible with all Micro Swiss FlowTech hotends
Micro Swiss FlowTech Hyper-CHT Nozzle
The FlowTech Hyper-CHT nozzle is the next generation of high flow printing. A six-chamber internal geometry more than doubles the heated surface area inside the nozzle, improving heat transfer and pushing flow rates up to 95% higher than a stock nozzle. Powered by patented Bondtech CHT technology, it melts filament more efficiently so you can print faster without sacrificing print quality.
Made in the USA by Micro Swiss
The Next Generation High Flow
Hyper-CHT uses a unique six-chamber internal geometry that increases heating surface area to 250 mm². Splitting the filament across more chambers means better contact with hot metal on the way down. This raises the maximum flow rate and creates more consistent melting through the entire zone.
Enhanced Layer Adhesion
Because the Hyper-CHT melts plastic evenly from the inside out, layer bonding stays strong at any speed. More uniform deposition means functional parts come off the plate with better structural strength, whether you are running fast drafts or slow detailed work.
Print Any Filament
The nozzle tip is heat treated to 68 HRC, hard enough to handle everything from standard PLA to highly abrasive carbon fiber and glass filled composites. Electroless nickel plating and a premium non-stick nano-WS2 coating give it a friction coefficient of 0.035, so plastic slides through instead of building up on the tip.
Specifications
- Available sizes: 0.4mm, 0.6mm, 0.8mm
- Internal geometry: six-chamber Hyper-CHT, 250 mm² heating surface area
- Hardness: heat treated to 68 HRC
- Plating: electroless nickel
- Coating: non-stick nano-WS2
- Coefficient of friction: 0.035
- Built with genuine Bondtech CHT technology
Compatibility
Fits all Micro Swiss FlowTech hotends:
- FlowTech Hotend for Creality K1 / K1 Max / K1C / K1 SE
- FlowTech Hotend for Creality CR-10 SE
- FlowTech Hotend for Creality Ender 3 V3 KE
- FlowTech Hotend for Creality Ender 3 V3 SE
- FlowTech Hotend for Creality Ender 3 V3 / Ender 3 V3 Plus
- FlowTech Hotend for Creality K2 / K2 Plus / K2 Pro
- FlowTech Hotend for Creality Hi
- FlowTech Hotend for Elegoo Neptune 4 / Neptune 4 Pro
- FlowTech Hotend for Elegoo Neptune 4 Plus / 4 Max
- FlowTech Hotend for Elegoo Centauri Carbon
- FlowTech Hotend for Bambu Lab X1 and P1 Series
- FlowTech Hotend for Sovol SV08
- FlowTech Hotend for Anycubic Kobra S1
What's in the Box
- 1x FlowTech Hyper-CHT nozzle (0.4, 0.6 or 0.8mm)
Volumetric Flow Rate Analysis
PLA (0.4mm)
PLA (0.6mm)
16 mm³/s 31 mm³/s 47 mm³/s 62 mm³/s
Test conditions: PLA. 0.4mm nozzle at 0.50mm line width, 0.3mm layer height. 0.6mm nozzle at 0.75mm line width, 0.3mm layer height. Figures from Micro Swiss.
M2910-04
14 Items
Specific References
- ean13
- 1786120817962
You might also like
The Micro Swiss Hyper-CHT nozzle uses a six-chamber internal geometry that more than doubles heated surface area, increasing the maximum flow rate by up to 95% over a stock nozzle. The hardened 68 HRC tip handles abrasive filaments and has a non-stick WS2 coating.
Compatible with all Micro Swiss FlowTech hotends