- On sale!

This complete hardware / fastener kit from Tensor3D includes all of the needed (plus spares) nuts, bolts, inserts, and washers needed for your Voron Trident build in a KB3D hardware organizer.
NOTE: T-Nuts may not fit well in LDO frame kits! Results are currently mixed.
For use with any size Trident build (250mm, 300mm, 350mm)
Made from 304 stainless!
Includes everything from the "Fasteners" Section of the Voron Trident BOM.
(1) KB3D 17 compartment hardware organizer with modular tray sizes
Specification | BOM | Tensor3D Kit |
M3x6 BHCS | 34 | 38 |
M4x6 BHCS | 7 | 9 |
M5x10 BHCS | 55 | 61 |
M5x16 BHCS | 40 | 44 |
M5x30 BHCS | 6 | 8 |
M3x12 FHCS | 10 | 12 |
M3x6 FHCS | 14 | 16 |
M3 Hammer Head T-nuts | 65 | 72 |
M3 Threaded Insert (M3x5x4) | 52 | 58 |
M3 Hexnut | 2 | 4 |
M5 Hexnut | 15 | 17 |
M3 Locknut | 6 | 8 |
M3 Roll-in T-nut | 88 | 97 |
M5 Roll-in T-nut | 69 | 76 |
M2x10 Self-Tapping Screw | 20 | 22 |
M3x12 SHCS | 65 | 72 |
M3x16 SHCS | 16 | 18 |
M3x20 SHCS | 8 | 10 |
M3x30 SHCS | 21 | 24 |
M3x40 SHCS | 6 | 8 |
M3x8 SHCS | 145 | 160 |
M5x40 SHCS | 10 | 12 |
M4 Knurled Nut | 3 | 4 |
M3 Washer | 2 | 4 |
M5 1mm Spacer | 22 | 25 |
You might also like