3DO Nozzle Camera Kit
Designed and produced by 3DO this Nozzle Camera Kit is a purpose built solution for 3D Printers. Available in 4K with multiple cable lengths.
3DO Nozzle Camera Kit
Designed and produced by 3DO this Nozzle Camera Kit is a purpose built solution for 3D Printers. Available in 4K and multiple cable lengths.
See the project's Github here for print files and more information
Kit includes:
1x Nozzle Camera (4K)
4x 2*10mm SHCS screws (for PCB mounting)
2x 5050 SK6812 WWCW 6000K LED
Also Required:
1x High-quality high-temperature USB cable (FEP + Silicone) - CHOOSE YOUR LENGTH FROM THE DROP DOWN MENU!
Options:
4K via Sony IMX258
|
4K (Sony IMX258) |
|
Sensor Size |
1/3.06 |
|
Mega-Pixel |
13MP |
|
Frame Rate |
30FPS@4K 60FPS@1080P |
|
Lens type* |
Fixed Focus |
|
FoV |
80Deg |
|
Operating temperature** |
-20°C TO 60°C |
|
Storage temperature |
-40°C TO 80°C |
*Focus distance from the back side of the camera to the object is set to 34.5mm
(it’s possible to change the focus distance by rotating the lens. Note the lens is glued in place, so new glue needs to be applied after adjusting)
**Though this is the camera rating we tested it in a 70C heat chamber for 24hrs without any issues. Not recommended for machines with high chamber temperatures.
FPC (Ribbon between sensor and PCB) is rated at 225C.
Acknowledgements:
CAD Design & Testing
Olof Ogland (Known from Bondtech)
Kenneth Munkholt (VZ Community)
Dennis Jespersen (From RatRig Comunnity)
Software Development & Testing
Meteyou (Mainsail founder)
KwadFan (Crowsnest founder)
Rogerlz(Crowsnest Tester)
Beta Testers
Mitsuma (From RatRig Comunnity)
Joao Barros (From RatRig Comunnity)
You might also like